15(4)x189 Osmo Oil Raw 3044 Engineered Oak Flooring

15mm Thick Boards, 4mm Oak Wear Layer, 189mm Width, 1860mm In Length(Please note these are straight boards and the pictures are to show you our finished colour)Our 15 x 189 Osmo Oiled Raw 3044 Engineered Oak Flooring is available as a micro bevelled meaning that by ordering this micro bevelled product, the width of each board within your finished floor will be defined by a small ‘v’ groove that the bevelled edge provides.Our boards are hand finished at our warehouse in Pembroke Dock with two coats of Osmo Raw 3044, giving it a lovely stripped back, natural unfinished look but being protected and sealed at the same time. A lead time of around 5 working days is required for oiling and each order is oiled to order. Therefore, please bare this in mind when at check out.This engineered oak flooring is 15mm thick, which is made from 11mm of Eucalyptus plywood underside that is bonded to a full 4mm French oak wear layer and is 189mm wide. The flooring is single strip oak, which shows off beautifully the extra width that is available to you when you order from our engineered oak flooring product range.Our 15 x 189mm engineered oak flooring is suitable to be installed over under floor heating. The engineered boards do not have a softwood core and because of this, they are strong enough to be fitted using any of the three common methods: glue down, nail down or float.This flooring is particularly popular in rooms with large staircases and other similar features because the floor can be easily coordinated to match up with the rest of the room. By finishing the flooring on site in your home or venue, a “seal” is achieved between each board, which is particularly useful for areas where spillages may occur.