“ADR-4560-501-130 AdamsRite: Flat Lever Trim without Return, ADA compliant design, For 1-3/4 In. to 2 In. Thick Door, LH or LHR, Satin Aluminum Paint”

Description“The 4560 Series Deadlatch Handles easily unlock the 4300, 4500, and 4900 Series Deadlatches. These handles fit solidly into the cylinder hole of Adams Rite deadlatches.Designed to operate 4300, 4500, and 4900 Series Deadlatches by a natural downward hand movement, these handles incorporate an activator cam disc that mounts on the handles’ escutcheon and fits solidly into the cylinder hole of the latch. Not intended for use as a door pull.ADA Compliant Handle of cast aluminum. ADA compliant lever is shaped to fit the hand, with a concave thumb-rest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile. Handle Type Lever Door Thickness 1-3/4″” to 2″” Escutcheons A 1/4″” [6.4 mm] square heat-treated spindle is part of escutcheon assembly, which interlocks with the cam plug. Finished to match lever. 4560, 4565 use the same sloping 1-3/8″” x 4″” [34.9 mm x 101.6 mm] escutcheon, designed to match the clean lines of a narrow stile door. Cam Plug Secured in latch body by cylinder set screw, the plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, reversing the cam, and replacing the clip.Handing Configured for LH/LHR but is easily reconfigured in the field to accommodate either door swing. Finish 130 Aluminum”